Olympic Kilns Olympic Oval Kiln : 3018H With KilnStar Controller

Note: shown is the taller 3027

Model comes with stand, peephole plugs, instruction manual, and warranty card.

One-year warranty.

Note: shown is the taller 3027

See chart at bottom of this page for all of this kiln's specifications.

OLYMPIC OVAL KILNS

The Olympic Oval was created to fill many needs. First, to provide a kiln for large ceramic pieces and big commercial loads, while requiring little more floor space than the cylindrical kiln it replaces, and, second, to offer an extremely energy efficient kiln for larger loads. This efficiency can be illustrated by comparing the power to volume ratio of an oval to that of a conventional kiln.

The oval, long the workhorse for the busy studio or ceramic factory, has been redesigned for the fast firing requirements of the contemporary studio or those doing ceramic production.

Firing Temperature

ONLY "H" Model Olympic Ovals models are rated for cone 10 on 208, 240 or 480 volts.

Non-"H" models are all rated cone 8.

Adding a blank ring decreases the maximum firing temperature by about 2 cones.

Plugs vs. Direct Wired

All Single phase Oval kiln which draw 50 or more amps are direct wired.

Single phase Ovals drawing fewer than 50 amps are equipped with a