North Star Equipment #3 Tile Accessory 7 Piece Die Set

North Star Equipment #3 Tile Accessory 7 Piece Die Set for 4" Extruder

DS3A - 1 3/4"x11/16" Fancy Flat Top Bar

DS3B - 1"x7/8" Round Top Trim

DS3C - 7/8"x1/2" Concave Top Trim

DS3D - 3/4"x5/8" Concave Top Trim

DS3E - 1 3/4"x3/4" Scalloped Top Bar

DS3F - 2 1/2"x1" Fancy Convex bar

DS3G - 2 7/8"x1 1/2" Fancy Hollow Dome

1/2" Thick HDPE Polyethylene Plastic Dies. No Rusting or Oxidation. CNC Machined for Exact Shapes & Sizes.

The 4" extruder dies are made of 1/2" HDPE (High Density polyethylene). Which is extremely wear-resistant and completely non-contaminating. The top edge of the die cavity is beveled to compact the clay as it passes through, giving a crisp, more solid extrusion. In the hollow dies, there is a bevel on both the interior and exterior portions under each side of the bracket (which holds the center of the hollow dies) that helps the extrusion to "heal" after is has been cut apart by the bracket. This bracket fits into a slot machined into the top of the hollow die and is held in place by the barrel of the extruder. If a hollow die is mounted in place, the center part of the die is in exactly the right place and the wall thickness will automatically be even all the way around. In general, the walls of extrusions 3-1/2 inches OD or less are 1/4 inch thick, while larger pieces have 5/16 inch walls.